|
| |
Test Equipment
| Test Terminal Block |
|
Unibloc
549201 - 10E 6I 4T |
 |
|
-
Test meter installations
without disconnecting
-
400V 5A Rated
-
UV-resistant and
self-extinguishing V0 clear polycarbonate as per UL94
-
Electrolytic copper, 99.9
% purity
-
Anti-corrosion gold
chromate plating
Download the Data Sheet
|
|
| |
Kew Prove |
 |
|
The
Kew Prove is a compact proving unit with a fused test lead and
continuity checker.
• Outputs 690V AC/DC, using just
two contact points for AC and DC
• Continuity test for fused test leads
using a 4mm connector
• Magnetic base for convenience to
mount on metal panels
• Makes a perfect partner to the
KEW 1700 Voltage Tester
Download the Data Sheet |
|
| PAT Tester |
KT71 PAT
Tester |
 |
- Performs Earth bond at 200mA for
IT appliances and high current 20A for all other
appliances
- 250V / 500V insulation test
voltages
- Run / leakage at 230V
- Single rotary dial position
initiates test sequence
- Class I IT 200mA Earth Bond
- Class I 20A Earth Bond
- Class II
|
- Extension lead test – including
polarity
- LED indication of pass / fail as
well as a result display
- Automatic check if appliance is
switched on or not
- Test 110V appliances for earth
bond and insulation (with appropriate test adaptor)
- Tests in accordance with the IEE
Code of Practice
|
Download
the Data Sheet |
|
| PAT Tester |
KT75
PORTABLE APPLIANCE TESTER |
 |
Downloadable PAT
Earth bond 100mA/10A/26A
Earth bond null
110V/230V appliances
Ten pre-programmed Auto tests
Fuse test and check
Earth leakage at supply voltage
Flash test
Insulation test 250/500V DC
Load test at supply voltage
Download the Data Sheet |
|
| PAT Tester |
KT74
PORTABLE APPLIANCE TESTER |
 |
Downloadable PAT
Earth bond 100mA/10A/26A
Earth bond null
110V/230V appliances
Ten pre-programmed Auto tests
Fuse test and fuse check
Earth leakage at supply voltage
Insulation test 250/500V DC
Load test at supply voltage
USB memory port for fast and convenient
transfer of data
Download the Data Sheet |
|
| PAT Tester |
KT73 Plus
PAT Tester |
 |
Earth bond 100mA/10A/26A
Earth bond null
110V/230V appliances
Fuse test and check
Earth leakage at supply voltage
Insulation test 250/500V DC
Load test at supply voltage
Download the Data Sheet |
|
| PAT Tester |
Omegapat
Computerised PAT tester with flash test |
 |
|
Dielectric withstanding test with 1500 V and 3000 V AC,
DC insulation resistance measurement,
PE voltage drop / earth bond continuity test,
Leakage current measurement and functional test.
120 Pre-programmed Auto test sequences are stored in the
instrument's memory and they cover most of the test procedures
required by PAT standards. Auto test sequences give information
on allowed standard-set limits for all test parameters and
essentially accelerate measuring procedure.
Create and store Custom Auto tests sequences.
Multifunction, alphanumeric keyboard allows specific data
entries (appliance description, location, etc.).
Appliance identification and access to the test sequence via
Barcode reader or RFID tags.
Optional: 110 V version.
Download
the Data Sheet |
|
| PAT Tester |
Betapat
Computerised PAT tester |
 |
|
Stores up to 4000 Tests
Flash Eprom, results will not be lost
Real Time Clock and Date for tests
Bar Code System (optional)
Simply Pats Software (optional)
Even tells you if the appliance is not switched on
Stores Test Engineers Name
Stores Customers Name
Stores Building / Room Name
Stores Appliance Description
Tests All Equipment
Full Schematic Help Menu shows how to perform test
Full Qwerty Key Pad
Stores all test criteria under all regulation
Stores Re-test Dates
Stores Repair Information
Download
the Data Sheet
|
|
| PAT Tester |
Alphapat
MI2142 Computerised PAT tester |
 |
|
Tests
all types of appliances Tests at 100V, 230V and 415V
Alpha, numerical keypad Auto run mode or single test mode
Tests all IT Equipment Barcode Compatible
Automatically sets the speed of downloading results Very fast to
test and downloads 2000 results in under 5 minutes
Stores 120 pre-selected test procedures to NEW IEE Guidance
notes
Just enter 3 digits either manual or with Bar Code and the
tester will pre-set your test parameters, pass and fail levels
Tests extension leads, working out fuse size and correct earth
resistance from cable length and CSA
Lightweight with rugged carrying bag for easy operation around
neck or shoulder, weighing less than 3.5kg
Fully conforms to all the testing standards issued by IEE, HSE,
EAWR 1989, VDE, 701T1, 702T1, 0751T1
Download
the Data Sheet |
|
| PAT Tester |
Autopat
MI2143 Computerised PAT tester |
 |
|
Quick
and simple to use Tests all equipment 110V, 230V and 415V
Tests IT equipment (computers, etc.) Earth Bond Test at 25A
Limits on sub leakage up to 0.75mA Built in buzzer and timer for
all tests
Individual pass and fail of all tests by LED display Weighs less
than 3.5kg
Overall pass and fail of equipment indicated by LED display
Earth Bond pass levels indicated better than 0.1ž or 0.5ž
All tests timed and carried out to meet the NEW IEE Guidance
notes and EAWR 1989 plus HSE requirements
Complete with rugged carrying bag for easy operation, and
calibration certificate
Meets the requirements of the NEW IEE Guidance notes on pass
levels for insulation test
i.e. 1Mohm for Class 1 Equipment & 2Mohm for Class 2 Equipment
Download
the Data Sheet |
|
| 16th Edition instrument tester |
FC8000. HIGH
PRECISION PORTABLE
CALIBRATOR |
 |
-
Simple to use
A self test setup procedure including a high current loop
impedance test sets up the instrument within seconds, and it
also tests to three decimal places for greater accuracy. A
temperature function checks for the correct calibration
environment.
-
Continuity
6 test points
Checks for voltage output, current and peak current
-
Insulation
6 test points
Checks for voltage output, current and peak current and has
statutory 0.25, 0.5 and 1.0MΩ test points (±0.25%).
-
Loop
8 test points (±0.25%)
Self-calibration of loop at the FC8000’s socket – 0.001Ω
resolution – Mains voltage displayed.
|
-
PSC
8 test points
self-calibration.
-
RCD
9 nominal currents – 8 time test points
Includes Manual, automatic, half and ramp functions allowing
calibration of all RCD functions.
-
Temperature
Temperature function that displays ambient temperature
-
Calibration Port
A calibration port is provided for fast calibration of the
FC8000 unit itself
|
Download the Data Sheet
|
| 16th
Edition instruments |
MI3101
Eurotest 18 in 1 |
 |
Loop and Line impedance also
without RCD triggering
RCD test
Varistor test
Illumination
Phase sequence in 3-phase systems
Measurements on earthing and lightning systems with included
2-clamp method (without junctions disassembling).
|
| 16th
Edition instruments |
MI2700 3
Piece Test kit inc st kit inc MI2121,MI2122,MI2123 |
 |
Kit includes MI 2121, MI 2122
and MI 2123
Complete with Smartlink Software
Conforms to BS7671
Meets all the requirements of Part P
Conforms to BSEN61557
Each Tester stores 1000 test results
Conforms to 16th Edition
Quality Rigid Carrying Case
|
| 16th
Edition instruments |
Eurotest AT
MI3101, Eurotest AT |
 |
Save time and speed-up
operator's work: up to 5 times faster testing than with manual
procedures.
Make test operation simple and easy to understand: one single
press of the TEST button for all the necessary operations.
Eurotest AT guides the operator through whole procedure.
Increase reliability: up to 50 acquired test results with
corresponding parameters are saved at once. Preprogrammed test
sequences guarantee that none of necessary tests will be
forgotten ever.
Immediate certification: delivering automatic evaluation of
safety with pass/fail indication for each performed test and
overall test results simultaneously.
Take the troubles out of report creation: EurotestAT PC software
gives you all the necessary tools to generate standardized test
report in less than a minute.
Safe usage: automatically detects possible safety hazards for
the operator, by means of continuous monitoring of terminal
voltages and by PE touch electrode TEST key, which are active in
all test functions.
Download the Data Sheet
|
| 16th
Edition instruments |
MI3102
Eurotest XE, All In One Insulation Tester |
 |
Schematic Help Screen shows
how to carry out test Fuse Tables and Characteristics in built
Automatically calculates Ipsc
Auto Power Off
Built in Charger System Can use Re-chargeable Batteries
(optional)
Small Compact and weighs 1.3kg
Voltage protected on all ranges
Download Facility
Data Storage IR / IRDA Communication
PC Link Software Stores 500 Test Results
Download the Data Sheet
|
|
